Table of Contents
Advertisement
Digital Projection INSIGHT 4K Dual LED & Quad Series
4.
If you are replacing the filters, skip this step.
To clean the filters, use a vacuum cleaner brush attachment to vacuum
away dust from the air filters. Avoid making direct contact without an
attachment or using a nozzle attachment.
5.
Mount the air filters to the projector. Look for an arrow (AIR FLOW↑)
indicating the installation direction on the side of the air filter. Point the
arrow towards the projector.
6.
Close the filter cover.
7.
Tighten the knobs clockwise to secure the cover.
Installation and Quick-Start Guide
CLEANING AND REPLACING THE FILTERS, DUAL LED
Notes
The information
on this page refers to
INSIGHT 4K Dual LED.
Before changing the filters,
always make sure the projector
is switched off and fully
disconnected from its power
supply.
When changing the filters, avoid
using excessive force as this may
damage the equipment.
Filters should be replaced as
necessary upon visual inspection
and in accordance with operating
environment.
Rev B June 2016
page 18
Advertisement
Table of Contents
