Orientation And Tilting - INSIGHT 4K Dual LED Series Installation And Quick Start Manual

Digital Projection INSIGHT 4K Dual LED & Quad Series

Orientation and tilting

INSIGHT 4K Dual LED can be positioned at any angle,
as shown in the illustration.
The following restrictions apply to INSIGHT 4K Quad:
•
Do not position the projector in portrait mode or with the lens
pointing down.
•
Vertical positioning with the lens pointing up is possible but with
implications on lamp life.
•
When positioned in desktop or ceiling mode, do not tilt the
projector more than ±12° along the pitch or roll axis.
INSIGHT 4K Quad: no portrait mode or lens pointing down
Installation and Quick-Start Guide
POSITIONING THE SCREEN AND PROJECTOR
Desktop
±360°
±360°
INSIGHT 4K Dual LED:
any angle is possible
±12°
±12°
INSIGHT 4K Quad:
Up to ±12° tilt
±360°
±360°
Ceiling
Desktop
±12°
±12°
Ceiling
Notes
Always allow the projector
to cool for 5 minutes before
disconnecting the power or
moving the projector.
Ensure that there is at least 30
cm (12 in) of space between the
ventilation outlets and any wall,
and 10 cm (4 in) on all other
sides.
Projectors are not designed to
be stacked on top of each other
unless a rigging frame is used.
Rev B June 2016
page 15