HIKVISION UD04363B Quick Start Manual page 17

Network Bullet Camera·Quick Start Guide
No. Description
1 Mounting Base
2 Back Case
3 Front Case
4
5 Sun Shield
This type of bullet camera supports PoE power supply. You can

power the camera by connecting both DC 12V interface and the
Ethernet interface. Or you can connect the Ethernet interface
only.
Press and hold the reset button about 10s when the camera is

powering on or rebooting to restore the default settings, including
the user name, password, IP address, port No., etc.
Table 1-3
Lens
Description
No.
6 Grounding Screw
10/100M Self-adaptive
7
Ethernet Interface (PoE)
8 Power Supply (DC 12V)
9 Memory Card Slot
10
16
Description
Reset Button