Iax2 Config - ATCOM AT-640P Quick Start Manual

AT-640P AT-640P AT-640P AT-640P Quick
C C C C 、 、 、 、 IAX2
�
�
�
�
�
�
�
�
�
�
�
�
�
�
ATCOM TECHNOLOGY CO., LIMITED
Downloaded from www.Manualslib.com
Quick Quick Quick Start Start Start Start Guide Guide Guide Guide
IAX2 config
IAX2

IAX2 config

config config
Above is the IAX server configuration page
IAX Server Addr: Register address of public IAX server
IAX Server Port: Register port of public IAX server，default port is 4569
Account Name: Username of your SIP account (Always the same as the
phone number)
Account Password: Password of your IAX account.
Local port: Signal port of local, default port is 4569
Phone Number: Phone number of your IAX account.
Voice mail number: If the IAX support voice mail, but your username of the
voice mail is letters which you cannot input with the ATA , then you use the
number to stand for your username.
Voice mail text: if IAX support voice mail, config the domain name of your
mail box here.
Echo test number: If the platform support echo test , and the number is test
form , the config the test number to replace the text format The echo test is
to test the error status of terminals and platform
Echo test text: echo test number in text format
Refresh time: IAX refresh time
Enable Register: enable or disable register
Enable G.729: Using G.729 speech coding mandatory consultations
manuals search engine