Wan Config - ATCOM AT-640P Quick Start Manual

AT-640P AT-640P AT-640P AT-640P Quick
2 2 2 2 、 、 、 、 Configure
A A A A 、 、 、 、 WAN
Enter
AT-640P supports three different IP types: Static IP, Dynamic obtain IP (DHCP)
and PPPoE. You can use either of these IP types to connect the internet.
Use Use Use Use Static
----Select "Static";
----Enter the AT-640P's IP address in the "IP address" field.
----Set the "Net mask", default 255.255.255.0
----Enter the AT-640P's upper gateway IP address (for example: Router) in the
"Gateway" field
----Key in the DNS information in the "Primary DNS" and "Alter DNS" fields.
Use Use
Use Use DHCP:
----Select DHCP
If you have a DHCP server in your network, AT-640P will automatically obtain
the network information from your DHCP server.
Use Use Use PPPoE: Use
----Select PPPoE
----Type your PPPoE dialup information in the PPPoE setting fields: PPPoE server
(option), Username and password.
Then the AT-640P will connect to the internet through PPPoE, and automatically
obtain the IP address, Net mask, Gateway, Primary DNS and Alter DNS
information.
ATCOM TECHNOLOGY CO., LIMITED
Downloaded from www.Manualslib.com
Quick Quick Quick Start Start Start Start Guide Guide Guide Guide
Configure AT-640P to to to to make AT-640P
Configure Configure AT-640P AT-640P
WAN WAN Config Config

WAN Config

Config
Network� � � � WAN
Network Network Network WAN WAN Config WAN Config Config Config
Static IP: Static Static IP: IP: IP:
DHCP: DHCP:
DHCP:
PPPoE: PPPoE: PPPoE:
manuals search engine
make VoIP calls
make VoIP make VoIP calls VoIP calls calls
to set the WAN setting: