Canon iR3250 Maintenance Manual page 22

2
Place the paper in the stack bypass.
Insert the required number of sheets with
the printing side face up along the paper
guides until the paper stops.
IMPORTANT
• If you are loading a large size of paper,
pull out the auxiliary trays.
• Make sure that the height of the paper
stack does not exceed the limit mark
• When printing from the stack bypass and
using paper that is curled, paper jams
tend to occur. Make sure to remove any
curl before loading the paper.
• Before printing manually onto the reverse
side of a sheet that has already been cop-
ied on one side, straighten any curled
edges, then place the sheet in the stack
bypass with the blank side up.
• When adding paper to the stack bypass,
remove any paper remaining in the stack
bypass, align it with the new paper, then
reload the entire stack.
.
Loading Paper 1-11