Mitsubishi Electric AJ65BT-64DAI User Manual page 14

6.2 Module connection example
(1) The wiring example to external devices for AJ65BT-64DAV is shown below:
*1: Use two-core shielded line for the wiring.
*2: When noise or ripple generates within the external wiring, connect a condenser with
0.1 to 0.47F (25V or more voltage resistance parts) specification to the input terminal
of the external device.
(2) The wiring example to external device for AJ65BT-64DAI is shown below:
*1: Use two-core twist shielded line for the wiring.
*2: When noise or ripple generates within the external wiring, connect a condenser with
0.1 to 0.47F (25V or more voltage resistance parts) specification to the input terminal
of the external device.