General Description - Shure P3RA User Manual

General Description

The Shure P3RA bodypack receiver works with Shure P3T transmitters as part of the PSM300
an LCD display delivers increased functionality over the standard PSM300 bodypack receiver, while an all-metal housing provides superior durability. Compatibility with
the Shure SB900 rechargeable battery delivers improved battery life and provides an environmentally friendly way to save money and reduce waste.
For more information on using the P3RA with the PSM300 system, refer to the PSM300 user guide (included with the transmitter and available at shure.com).
P3RA Bodypack
① Antenna
Receives signal from P3T transmitter
② RF Indicator
Illuminates when the bodypack is receiving a
signal from the transmitter
③ Volume Knob / Power Switch
Turn to power on/off and adjust headphone
volume
④ Battery LED
Indicates battery status
Note: see the battery life table for specific run-
time values
⑤ Headphone Output
Use earphones or headphones with a 3.5 mm
(1/8-inch) plug
⑥ Display
Shows settings and menu navigation
⑦ Navigation buttons (▲▼)
Use to scroll through menu and adjust
settings
3
stereo personal monitoring system. An advanced user menu featuring
®
⑧ Exit button
Press to return to previous screen
⑨ Enter button
Press to enter a menu screen or to confirm a setting
⑩ IR Sync Window
Use to send group and channel settings between
the bodypack and transmitter
⑪ Scan Button
Press to perform an RF scan
⑫ Battery Compartment
Uses a Shure SB900 rechargeable battery or two
AA batteries
⑬ Removable AA Adapter
Remove to use with a Shure SB900 rechargeable
battery
Note: To remove, open the door and slide the adapt-
er out. To reinstall, press the adapter into place—
there is an audible click when seated.