Shure P3RA User Manual page 7

MixMode and Stereo Monitoring
The bodypack can operate in either of the following listening modes:
Stereo (default)
To operate in stereo mode, enter the menu and select AUDIO > MODE > STEREO .
In stereo mode, audio from channel 1 is heard on the left earphone, while audio from
channel 2 is heard on the right earphone. Listening in stereo increases clarity and
separation between the sources on each channel.
Adjusting Balance
To adjust the left/right balance, select AUDIO > BAL ST. Use the ▲▼ buttons to change
the setting.
MixMode
To operate in MixMode, enter the menu and select AUDIO > MODE > MIXMODE.
In MixMode, the blend between two monitoring mixes (an instrumental mix and a vocal mix, for example) is adjustable. The signal is mono, which means each mix is
heard through both the left and right earphones.
Adjusting mix blend
To adjust the blend between channel 1 and channel 2, enter the menu and select AUDIO > BAL MX. Use the arrow buttons (▲▼) to make adjustments.
In this scenario, an instrumental mix is on channel 1 (left) and a vocal mix is on channel 2 (right):
MIXMODE
Instruments
To hear more of channel one (instruments), shift the balance towards
To hear more of channel one (instruments),
shift the balance towards the left.
Balance and Mix Adjustments from the Home Screen
To make quick adjustments to the stereo balance or MixMode blend, use the arrow buttons (▲▼) while in the home screen. If necessary, use the lock feature to prevent
any accidental adjustments.
10L
Vocals
the left.
Instruments
Vocals
Left (Channel 1)
MIXMODE
Instruments
To hear more of channel two (vocals), shift the balance towards the
To hear more of channel two (vocals), shift
the balance towards the right.
5
Right (Channel 2)
10R
Vocals
right.
Vocals
Instruments