Address Space - Siemens simatic S7-1500 Manual

4.3

Address space

The module can be configured differently in STEP 7; see following table. Depending on the
configuration, additional/different addresses are assigned in the process image of the
outputs/inputs.
Configuration options of DQ 32x24VDC/0.5A HF
You can configure the module with STEP 7 (TIA Portal) or with a GSD file.
When you configure the module by means of the GSD file, the configurations are available
under different abbreviations/module names.
The following configurations are possible:
Table 4- 2 Configuration options
Configuration
1 x 32-channel without value status DQ 32x24VDC/0.5A HF
1 x 32-channel with value status
4 x 8-channel without value status
4 x 8-channel with value status
1 x 32-channel with value status for
module-internal Shared Output with
up to 4 submodules
Note
Substitute value behavior in shared device mode with the following configuration:
• 1 x 32 channel with value status for MSO
• 1 x 32 channel with / without value status
• 4 x 8-channel with / without value status
If the system is in shared device mode and one of the IO controllers involved goes into
STOP or fails due to a communication failure, for example, all submodules of the output
module perform the configured substitute value reaction (e.g. shutdown).
This means that even when only one IO controller fails, the other IO controllers associated
with the shared device no longer control the assigned submodule of the output module.
Digital output module DQ 32x24VDC/0.5A HF (6ES7522-1BL01-0AB0)
Manual, 09/2016, A5E35683508-AB
Abbreviation/module name in
the
GSD file
DQ 32x24VDC/0.5A HF QI
DQ 32x24VDC/0.5A HF S
DQ 32x24VDC/0.5A HF S QI
DQ 32x24VDC/0.5A HF MSO
Parameters/address space
Configuration software, e.g., STEP 7 (TIA Portal)
Integrated in the hard-
ware catalog STEP 7 STEP 7 (TIA Portal) V12 or
(TIA Portal) as of V13 higher or STEP 7 V5.5 SP3
SP1 with HSP 0143
X
X
X
(PROFINET IO only)
X
(PROFINET IO only)
X
(PROFINET IO only)
4.3 Address space
GSD file in
or higher
X
X
X
(PROFINET IO only)
X
(PROFINET IO only)
X
(PROFINET IO only)
19