Table of Contents
Advertisement
Error Message Resolution Guide
Message
Reason
REMOVE FROM CRADLE; Remove Mobile Unit from the cradle.
ACQUIRING CRADLE BUS; Attempting to access the cradle through the
serial port you have configured.
Printer Out\nOf Range;
Printer out of the coverage area.
Connection Refused\nBy
You connected to the target host but the
Host;
host disconnected you.
Connection Timed Out;
You connected to the host but did not logon
in the appropriate time so the host
disconnected you.
Connection Failed\nHost Not
Could not connect to the Host.
Responding;
Connection Failed\nHost
Could not connect to the Host.
Unreachable;
Mobile Unit Out\nOf Range,
Mobile Unit out of the coverage area.
Unable\nTo Transmit;
Mobile Unit Out\nOf Range,
Mobile Unit out of the coverage area.
Unable\nTo Receive;
4-10
Solution
Advisory message.
Advisory message.
Most likely a range, access point or radio
issue. Troubleshoot the customer's
environment.
Verify that the configuration file has the correct
Mobile Unit type and New environment
variable set. Fallback to the Connect Default
to verify the connection.
Modify the Host parameters for login.
Most likely a range, access point, radio, host
or network issue. Troubleshoot the customer's
environment.
Most likely a range, access point, radio, host
or network issue. Troubleshoot the customer's
environment.
Most likely a range, access point, radio, host
or network issue. Troubleshoot the customer's
environment.
Most likely a range, access point, radio, host
or network issue. Troubleshoot the customer's
environment.
Supported Equipment Manual
Reference Tech Note
---
---
T1113, T1114, T1161,
T1171, T1187 and
T1194
---
---
T1113, T1114, T1161,
T1171, T1187 and
T1194
T1113, T1114, T1161,
T1171, T1187 and
T1194
T1113, T1114, T1161,
T1171, T1187 and
T1194
---
•
May, 2006
Advertisement
Table of Contents
