Table of Contents
Advertisement
Terminal Setup
Click on the
Group. Next, click on the
configuration file saved earlier.
Check the
addresses, software, and configuration files to the terminals. Click on the
upper right corner to return to the main menu.
The software does not need to be authorized now. It can be authorized later, after a
Note:
Downloading Files To Terminal
Twin Client program and configuration files are installed on the terminal with the
following procedure. Boot the terminal, according to the directions in the next section. At
the
DOS
Under the
2-10
+
sign in front of
Terminal/Group Manager
New Group
box, and the system is now configured to automatically download IP
Active
Telnet session has been established. The procedure is described in Authorizing
PowerNet under Standard Setup.
prompt, type "
LD
" but do not
menu, click on the
Terminal
to access the default terminal
icon and use the
Browse
Enter
at this time.
Send Program Files to Terminal
Supported Equipment Manual
button to select the
box in the
menu option.
•
May, 2006
Advertisement
Table of Contents
