Table of Contents
Advertisement
Terminal Setup
Manual Download of Configuration Files
The automated configuration management provided by the Twin Client Manager
eliminates the need for manual terminal configuration. However, this function can be
accomplished manually by clicking on
Terminal
and
Send Configuration Files to
Terminal.
On the terminal, type "
LD
" at the DOS prompt, but do not
Enter
at this time.
This procedure assumes that the PowerNet Twin Client was previously installed.
Note:
The following screen appears.
Choose
on the terminal while choosing
at the prompt above
Boot the terminal.
Enter
OK
.
The terminal is now ready to begin a Telnet session with the new configuration files.
Under
Terminal
, you may select
Receive File from Terminal
.
Enter the path and file name to receive from the terminal in the Upload File dialog box.
The default file is "
". Click on
rf.log
OK
.
•
2-31
Supported Equipment Manual
May, 2006
Advertisement
Table of Contents
