Terminal Setup
Repeat this step for each Telnet server the terminals are required to access. If an error is
made in the name, IP Address, IP Port number, or Terminal emulation type, click on the
line that is in error and then click on the
button to make the corrections.
Edit
Setting Terminal Model
Under
Settings
, choose the
Options
menu as shown.
Select terminal model, desired radio type, and COM port.
Saving the Configuration
Click on
File
and
Save As.
Enter a name for this configuration.
For the purposes of this example, the name is
.
vt100
•
2-7
Supported Equipment Manual
May, 2006