Table of Contents
Advertisement
At the prompt, choose
run in Telnet mode.
The following screen will appear.
Now, choose
The files will transfer at this time. Watch the terminal to see that the correct files are
loading. Boot the terminal according to the following section. The Twin Client Manager
will then automatically manage the terminal software and configuration.
Booting the Terminal
At any time it is necessary to update the terminal software and/or configuration, the
terminal must be booted. To boot the terminal, press the <
A successful wireless connection is indicated by the display of the Twin Client main
menu shown below.
Twin Client
© 1991-2006, Connect, Inc.
Keypress to Continue
Note:
The date of 2006 is updated on the terminal at the time of a new release.
The terminal is now ready to establish a Telnet session with the host system.
Supported Equipment Manual
Yes
or
No
to download configurations
on the terminal, while choosing
Enter
•
May, 2006
Terminal Setup
.
Choosing
Yes
at the prompt above
OK
>+<
>+<
> keys
sft
clr
1
is needed to
.
.
2-11
Advertisement
Table of Contents
