Table of Contents
Advertisement
Run Client Emulator
After all desired changes have been made, select this option to return to the Twin Client
main menu. Then press any key to establish the Telnet session and begin emulation.
Refer to Starting a Telnet Session under Quick Start for further instructions.
Authorizing PowerNet
Each PowerNet Twin Client will run for 30 minutes at a time without authorization.
Uninterrupted operation for a production environment is the result of authorizing the
software. Authorization codes are obtained from the Connect web site at
http://www.connectrf.com
Authorization
Automatic Authorization
The Twin Client Manager can automatically authorize the terminal over the wireless
network if the following requirements are met:
•
A PC running Twin Client Manager is connected to the wire LAN segment with at
least one access point within range of the terminal.
•
The
to obtain a site license Authorization code from the Connect web site.
To obtain the System ID of the Twin Client Manager, click on the
in the
Settings
The Authorization window is displayed as shown below.
Supported Equipment Manual
on the
icon at the top of the page.
System ID
of the PC on which Twin Client Manager is installed has been used
menu, as shown below.
•
May, 2006
page. Click on the
Partner Services
Terminal Setup
Generate
Authorization
option
2-21
Advertisement
Table of Contents
