Table of Contents
Advertisement
Message
Reason
Connection
Could not Connect.
ERROR.\nREBOOT
MOBILE UNIT;
Disconnect
Could not Disconnect.
ERROR.\nREBOOT
MOBILE UNIT;
RF Send
Could not Send.
ERROR.\nREBOOT
MOBILE UNIT;
RF Receive
Could not Receive.
ERROR.\nREBOOT
MOBILE UNIT;
RF Check
Could not run the RF Survey.
ERROR.\nREBOOT
MOBILE UNIT;
RF Timeout
Have been trying to contact the host for the
ERROR.\nREBOOT
radio timeout period (2 minutes default).
MOBILE UNIT;
REBOOT MOBILE UNIT;
Reboot the Mobile Unit do to loss of
connection.
Retry (Y/N)?;
Try again.
•
Supported Equipment Manual
May, 2006
Solution
Verify that your Network settings are correct
and you are in the correct mode using the
correct Port.
Verify that your Network settings are correct
and you are in the correct mode using the
correct Port.
Most likely a range, access point, radio, host
or network issue. Troubleshoot the customer's
environment.
Most likely a range, access point, radio, host
or network issue. Troubleshoot the customer's
environment.
Most likely a range, access point, radio, host
or network issue. Troubleshoot the customer's
environment.
Most likely a range, access point, radio, host
or network issue. Troubleshoot the customer's
environment.
Most likely a range, access point, radio, host
or network issue. Troubleshoot the customer's
environment.
Try to send or receive again, or perhaps
ensure that the printer is cabled to the Mobile
Unit and is on.
Error Message Resolution Guide
Reference Tech Note
T1113, T1114, T1161,
T1171, T1187 and
T1194
T1113, T1114, T1161,
T1171, T1187 and
T1194
T1113, T1114, T1161,
T1171, T1187 and
T1194
T1113, T1114, T1161,
T1171, T1187 and
T1194
T1113, T1114, T1161,
T1171, T1187 and
T1194
T1113, T1114, T1161,
T1171, T1187 and
T1194
T1113, T1114, T1161,
T1171, T1187 and
T1194
---
4-3
Advertisement
Table of Contents
