Table of Contents
Advertisement
5.7
Setting of Cooling Unit
5.7.1 Local setting
Path:
12/04/30
ID
Contrast
Buzzer
Baud Rate
Total Alarm
System time
Use
ID (Number)
Represent the number of the cooling unit connected in series and also the ID in the
Modbus protocol. The default number is 1. If several cooling units are connected in se-
ries, you must designate each unit with a different number.
Contrast
Adjust the display screen contrast (0~5) and the default value is 2.
Buzzer
Set the buzzer on-off and issue an alarm beep to remind the user of an alarm event, if
any. The default is ON.
Language
Set the display language. Select a language and press
English (EN).
InfraSuite RowCool Precision Cooling –
Chilled Water
10:10:00
:01
:2
:ON
:
9600
:
Fault
to set up the system time and press
Language
User PW
Unit
Delay On
40
:
EN
:
----
:
C
:
0Sec
to confirm. The default is
Advertisement
Table of Contents
