2
3
InfraSuite RowCool Precision Cooling –
Chilled Water
Use nippers to remove the cover plate's knocking piece
gland from the accessory package, remove the cable gland's nut
gland
.
3
1
Knocking
piece
Power supply's
cover plate
(Figure 3-17 : Insertion of power wires)
Use a screwdriver to loosen the screws of the wiring terminal block and use ring-
type terminals to secure L1 (line), N1 (neutral) and G (ground) wires into the terminal
block and lock them. Since it is single input, each power supply unit should be each
other's backup power. Thus, please use another L1 (line) wire to connect L1 and L2
terminals and use another N1 (neutral) wire to connect N1 and N2 terminals.
Wiring terminal block
(Figure 3-18 : Installation of power wires)
Power
wires
Cable
gland
2
2
Nut
22
, take out the one cable
1
, use the nut to
2
3