Installing And Removing Sfp Modules; Installing Sfp Modules - Cisco ASR-920-12SZ-IM Hardware Installation Manual

Installing and Removing SFP Modules

Installing and Removing SFP Modules

These sections describe how to install and remove SFP modules. The modules are inserted into the SFP module
slots as depicted in Installing an SFP Module into an SFP Module Slot figure. These field-replaceable modules
provide interfaces.
Each port must match the wavelength specifications on the other end of the cable. For reliable communications,
the cable must not exceed the stipulated cable length.
Use only Cisco SFP modules on the Cisco router. Each SFP module has an internal serial EEPROM that is
encoded with security information. This encoding provides a way for Cisco to identify and validate that the
SFP module meets the requirements for the router.
For detailed instructions on installing, removing, and cabling the SFP module, see the SFP module
documentation.

Installing SFP Modules

The following figure shows an SFP module that has a bale-clasp latch.
We strongly recommend that you do not install or remove fiber-optic SFP modules with cables attached
Caution
because of the potential damage to the cables, the cable connector, or the optical interfaces in the SFP
module. Disconnect all cables before removing or installing an SFP module.Removing and installing an
SFP module can shorten its useful life. Do not remove and insert SFP modules more often than is absolutely
necessary.
Figure 16: SFP Module with a Bale-Clasp Latch
To insert an SFP module into the module slot, follow these steps:
SUMMARY STEPS
1. Attach an ESD-preventive wrist strap to your wrist and to a bare metal surface on the chassis.
2. If the SFP module that you are using has the markings, use them to identify the top side of the module.
3. Align the SFP module in front of the slot opening.
4. Insert the SFP module into the slot until you feel the connector on the module snap into place in the rear
of the slot.
5. Insert the cable connector into the SFP module:
Cisco ASR-920-12SZ-IM Aggregation Services Router Hardware Installation Guide
52
Installing the Cisco ASR 920 Series Router