Wall Mounting The Router; Attaching The Brackets To The Router For Wall-Mounting - Cisco ASR-920-12SZ-IM Hardware Installation Manual

Installing the Cisco ASR 920 Series Router
Step 2
Secure the cable guides with the four M6x12mm screws supplied with the cable kit. The recommended maximum torque
is 3N-m.
Figure 13: Installing the Cable Guides (As Per the Standard Kit)

Wall Mounting the Router

To install the router on a wall, follow the instructions in these procedures:

Attaching the Brackets to the Router for Wall-Mounting

While wall mounting the router, always ensure that the power supplies are at the top position.
Note
Cisco ASR-920-12SZ-IM Aggregation Services Router Hardware Installation Guide

Wall Mounting the Router

49