Accessing And Uploading Print Jobs - LeapFrog BOLT User Manual

It will also give you a rough preview of the selected print job as well as an estimation on
how much time it will take printing it.

4.5 ACCESSING AND UPLOADING PRINT JOBS

The Bolt is fitted with 32 GB which can be used for storage of G-codes for the Bolt. This
storage can be accessed on the Bolt or on your computer, phone or tablet using Wi-Fi.
The Bolt has a USB port as well.
Accessing the Storage can be done via the Jobs tab in the bottom of the screen. Here
you can access the local storage, USB storage and search for a print.
When plugging in a USB storage device, you will be prompted to browse the USB files.
You can also access the USB on the top of the Jobs tab. On the USB storage you can
navigate to the desired file and upload it to the Bolt.
Any file on the Bolt storage will be analysed. The Bolt will read the G-code for
information like which nozzle is used, how much filament will be needed and will
provide the user with a rough preview.
To upload prints to the Bolt using Wi-Fi, the Bolt has to be connected to the same
network as your computer. In the wireless menu, an IP address can be found. Place this
IP address into your browser as you would a website URL to access the Leapfrog User
Interface of the Bolt. Login to get the right privileges and upload files in the Jobs tab.
For more information on accessing the Bolt via your network, see to chapter 6.3.
34