Information Available On Print Jobs; Accessing Print Jobs; Uploading Print Jobs: Usb; Uploading Print Jobs: Network And Wifi - LeapFrog Bolt Pro User Manual

Printing in Mirror mode will require a G-code file set on the correct left half of the print
bed. The Bolt Pro will copy and mirror the G-code automatically to the other half of the
print bed.
5.4

INFORMATION AVAILABLE ON PRINT JOBS

The Bolt Pro analyses print jobs uploaded to its internal storage.
The Bolt Pro will let the user know which nozzle is set in the G-code, as well as how
much filament will be needed. If the amount of filament left on the loaded filament
spool is less than needed, then the Bolt Pro will disable the start print function,
preventing the user to start printing an incomplete print.
It will also give you a rough preview of the selected print job as well as an estimation
on how much time it will take printing it.
5.5

ACCESSING PRINT JOBS

The Bolt Pro has internal storage for G-code files. This storage can be accessed on the
Bolt Pro or on your computer, phone or tablet using Wi-Fi. The Bolt Pro has a USB port
as well.
Accessing the Storage can be done via the Jobs tab in the bottom of the screen. Here
you can access the local storage, USB storage and search for a print.
5.6

UPLOADING PRINT JOBS: USB

When plugging in a USB storage device, you will be prompted to browse the USB files.
You can also access the USB on the top of the Jobs tab. On the USB storage, you can
navigate to the desired file and upload it to the Bolt Pro.
5.7

UPLOADING PRINT JOBS: NETWORK AND WIFI

To upload prints to the Bolt Pro using Wi-Fi, the Bolt Pro has to be connected to the
same network as your computer. In the wireless menu, an IP address can be found. Place
this IP address into your browser as you would a website URL to access the Leapfrog
User Interface of the Bolt Pro. Login to get the right privileges and upload files in the
Jobs tab.
For more information on accessing the Bolt Pro via your network, see to chapter 6.3
35