Uploading Your 3D Model; Uploading A Model From A Usb Device - LeapFrog Xeed Manual

Hide thumbs Also See for Xeed:
Table of Contents

Advertisement

Leapfrog 3D Printers - Manual Xeed
18

2.4 Uploading your 3D model.

Now that you have loaded the filament and the printer is on, it is time to load the model that you
wish to print. This section explains the steps to follow when uploading your 3D models.
Go to the
"Status"
tab in the upper left corner.
.
There are two ways to upload your models to the Xeed. You can use a portable USB device, which
you can insert in the back of the printer or you can use a network connection that allows you to
connect your Xeed with your computer through your network.

2.4.1 Uploading a model from a USB device

To upload a Gcode-file from your USB device plug the device in the back of the printer and tap on
the "Upload"-button. In that menu select the removable device and select your Gcode.
To upload the model from your USB device select it and tap on
"CHOOSE".
The model will be
added to the model list in the Status tab. Below is a screenshot with keywords for the 5 icons.

Advertisement

Table of Contents
loading

Table of Contents