Installing The Inner Rails On The Chassis; Installing The Outer Rails To The Rack - Bosch DIP-71F0-00N Installation Manual

DIVAR IP 7000 (3U)
4.
4.3.3

Installing the inner rails on the chassis

Caution!
Do not pick up the chassis with the front handles. They are designed to pull the system from
!
a rack only.
To install the inner rails:
1.
2.
3.
4.
5.
4.3.4

Installing the outer rails to the rack

Outer rails attach to the rack and hold the chassis in place.
Bosch Sicherheitssysteme GmbH
Separate the inner rail extension from the outer rail assembly.
Identify the left and right inner rails. They are labeled.
Place the inner rail firmly against the side of the chassis, aligning the hooks on the side of
the chassis with the holes in the inner rail.
Slide the inner rail forward toward the front of the chassis until the quick release bracket
snaps into place, securing the rail to the chassis.
Optionally, you can further secure the inner rail to the chassis with screws.
The following picture shows the inner rails installed on the chassis.
2
4
3
Installation Manual
Rack installation | en 21
2016.08 | V2.1 | DOC