DIVAR IP 7000 (3U)
The unit features hot-swappable hard drives which can be removed without powering down
To remove a hard drive from the chassis:
Except for short periods of time (swapping hard drives), do not operate the unit with the
hard drives removed from the bays.
Installing a hard drive into a hard drive carrier
The hard drives are mounted in hard drive carriers.
To install a hard drive into a hard drive carrier:
Bosch Sicherheitssysteme GmbH
Press the release button to the right of the hard drive carrier. This extends the hard drive
Use the handle to pull the drive out of the chassis.
Remove the screws securing the dummy drive to the hard drive carrier.
Maintenance | en
Hard drive carrier handle
2016.08 | V2.1 | DOC