Sanus SLT2 Instruction Manual page 15

3. Remove the wall plate template
CAUTION:
Be sure the anchors are seated flush with the concrete surface.
4. Install the wall plate
19
CAUTION:
Improper use could reduce the holding power of the lag bolt. DO NOT over-tighten the lag bolts.
Go to STEP 3 on PAGE 21.
3
and insert concrete anchors
18
using four lag bolts and washers
20
22
.
22
. Tighten all lag bolts only until they are pulled firmly against the wall plate.
21
4
20 21
19
15