Philips BJ2.4U Service Manual page 117

8.4.2 Dealer Options
Table 8-3 Dealer options
Menu item Subjects
Personal Options Picture Mute
Virgin Mode
8.4.3 (Service) Options
Select the sub menu's to set the initialization codes (options) of
the set via text menus.
Table 8-4 Service options
Menu-item Subjects
PIP/DS Dual Screen
Data TV Guide US
Display Screen
Scanning Backlight
Dimming Backlight
Video Repro Picture Processing
Combfilter
Ambient Light
MOP
Source Selection HDMI 1
HDMI 2
USB version
IEEE1394
Ethernet
S/PDIF inputs
Audio Repro Subw. Internal Present
Acoustic System
(Cabinet design, used for
setting dynamic audio
parameters).
Miscellaneous Alternative Tuner
Tuner Type
Opt. no. Group 1
Group 2
8.4.4 Opt. No. (Option numbers)
Select this sub menu to set all options at once (expressed in
two long strings of numbers).
An option number (or "option byte") represents a number of
different options. When you change these numbers directly,
you can set all options very quickly. All options are controlled
via eight option numbers.
When the NVM is replaced, all options will require resetting. To
be certain that the factory settings are reproduced exactly, you
must set both option number lines. You can find the correct
option numbers on a sticker inside the TV set.
Example: The options sticker gives the following option
numbers:
• 04368 00005 01066 08707
• 00000 00032 00512 00000
Options Description
On Picture mute active in case no picture detected
Off Noise in case of no picture detected
On TV starts up (once) with a language selection menu after the Mains switch is turned "on" for
the first time (virgin mode)
Off TV does not start up (once) with a language selection menu after the Mains switch is turned
"on" for the first time (virgin mode)
Options
None / 1 tuner / 2 tuners no DS / DS with one tuner / DS with two tuners
On / Off
"Value"
On / Off
On / Off
Spider / No Spider
None / 2D / 3D
None / Mono / Stereo
On / Off
None / Audio / No Audio No HDMI / HDMI with analog audio / HDMI without analog audio
None / Audio / No Audio No HDMI / HDMI with analog audio / HDMI without analog audio
None / 1.1 / 2.0 + CR
Yes / No
Yes / No
None / 1 conn. / 2 conn. None / 1 connector present (in)/ 2 connectors present (in/out)
Yes / No
None
Entry ME5 5W
Entry ME5 15W
(Soft) Wrap
Top
Entry+
Others
Philips / Alps
TD1336S
Alignments BJ2.4U/BJ2.5U PA
Description
Feature present / not present
Used screen size, type, and resolution
Feature present / not present
Feature present / not present
Feature present / not present
Only selectable when Columbus is present
Inverter not present / one inverter / two inverters
Feature present / not present; in this chassis, no MOP is implemented
No USB / USB 1.1 in side I/O panel / USB 2.0 in cardreader panel
Connector present / not present
Connector present / not present
Internal sub woofer present / not present
n.a.
n.a
42/50PF7320A
n.a.
n.a.
42/50PF9630A, 50PF9830A
n.a.
Tuner brand
Tuner type
xxxxx xxxxx xxxxx xxxxx (see set sticker)
xxxxx xxxxx xxxxx xxxxx (see set sticker)
The first line (group 1) indicates hardware options 1 to 4, the
second line (group 2) indicates software options 5 to 8.
Every 5-digit number represents 16 bits (so the maximum value
will be 65536 if all options are set).
When all the correct options are set, the sum of the decimal
values of each Option Byte (OB) will give the option number.
See next table for the option overview.
8. EN 117