Note For Safe Operation - TECO speecon 7200ma Instruction Manual

■NOTE FOR SAFE OPERATION

Read this instruction manual thoroughly before installation, operation,
maintenance or inspection of the inverter. And only authorized personnel should be
permitted to perform maintenance, inspections or parts replacement.
In this manual, notes for safe operation are classified as "WARNING" or
"CAUTION".
WARNING
CAUTION
■ "WARNING" or "CAUTION"
WARNING
•Always turn off the input power supply before wiring terminals.
•After turning OFF the main circuit power supply, do not touch the circuit
components until the "CHARGE" LED off.
•Never connect the main circuit terminals U/T1, V/T2, W/T3 to AC main power
supply.
CAUTION
•When mounting units in an enclosure, install a fan or other cooling device to keep
the intake air temperature below 45ºC.
•Do not perform a withstand voltage test to the inverter.
•All the parameters of the inverter have been preset at the factory. Do not change
the settings unnecessarily.
This inverter has gone thorough all the demanding tests at the factory before
shipment. After unpacking, check for the following:
1. Verify the model numbers with the purchase order sheet and/or packing slip.
2. Do not install any inverter that is damaged in any way or missing parts.
3. Do not install or operate any inverter that has no QC marking.
Contact our representative, if you find any irregularities mentioned above.
: Indicates a potentially hazardous situation which, if not heeded,
could possibly result in death or serious injury.
: Indicates a potentially hazardous situation which, if not heeded,
may result in moderate or minor injury and damage to the
product or faulty operation.