Re-Programming Procedure After Download; Recovery Procedure; Remote Machine Update; How To Update Firmware By Remote Fax - Ricoh B174 Service Documentation

5.4.2 RE-PROGRAMMING PROCEDURE AFTER DOWNLOAD

Re-program settings and data.
Necessary items are shown in the system data list.
Country code
The country code will not change after you download the new firmware.

5.4.3 RECOVERY PROCEDURE

The machine will not operate if the update procedure did not work correctly. At this
time, do these steps:
1. Turn the power off and then on.
2. Do the steps in the download procedure from step 4 again.
The machine will start the upgrade procedure again.

5.4.4 REMOTE MACHINE UPDATE

This function uses one fax machine installed with the most recent firmware. It
upgrades one or more other remote machines of the same type with the telephone
network.

How to update firmware by remote fax

1. Use a fax machine with the most recent firmware, to prepare it to send the
upgrade.
• Select "Remote" in Flash Upgrade of the Data Setup menu in Tech mode.
Tech Mode → Data Setup → Flash Upgrade (! 5.2.3)
2. Put in the telephone number of the fax machine to upgrade. (You can upgrade
several fax machines at the same time). At this time, put in the telephone
number for each machine.
3. Then press the enter button. This will send the firmware file to each of the set
fax machines. (It will be 10 or 15 minutes to send the file to each machine.)
CAUTION: 1) The sending and receiving fax machines must be the same model.
2) The sending fax must be set up in ECM mode. The receiving
machine memory must be set to 100%. If not, the upgrade will fail.
SM
FIRMWARE DOWNLOAD
5-11 B174