Table of Contents
Advertisement
Figure 87 Expert Mode > Maintenance > General
The following table describes the labels in this screen.
Table 56 Expert Mode > Maintenance > General
LABEL
System Name
Domain Name
Administrator
Inactivity Timer
Apply
Cancel
15.4 Password Screen
It is strongly recommended that you change your NBG6617's password.
If you forget your NBG6617's password (or IP address), you will need to reset the device. See
Section 15.8 on page 141
Click Expert Mode > Maintenance > Password. The screen appears as shown.
Figure 88 Expert Mode > Maintenance > Password
The following table describes the labels in this screen.
Table 57 Expert Mode > Maintenance > Password
LABEL
Old Password
New Password
Retype to Confirm
Chapter 15 Maintenance
DESCRIPTION
System Name is a unique name to identify the NBG6617 in an Ethernet network.
Enter the domain name you want to give to the NBG6617.
Type how many minutes a management session can be left idle before the session times
out. The default is 5 minutes. After it times out you have to log in with your password
again. Very long idle timeouts may have security risks. A value of "0" means a
management session never times out, no matter how long it has been left idle (not
recommended).
Click Apply to save your changes back to the NBG6617.
Click Cancel to begin configuring this screen afresh.
for details.
DESCRIPTION
Type the default password or the existing password you use to access the system in
this field.
Type your new system password (up to 30 characters). Note that as you type a
password, the screen displays an asterisk (*) for each character you type.
Type the new password again in this field.
NBG6617 User's Guide
136
Hide quick links:
Advertisement
Table of Contents
