ZyXEL Communications NBG6617 User Manual page 115

Table 46 Expert Mode > Applications > Bandwidth Management > Advanced (continued)
LABEL
Category
Service
Edit
User-defined Service
#
Enable
Direction
Service Name
Category
Modify
Apply
Cancel
13.3.2.1 Application List Edit
Click the Edit icon next to an existing rule to edit it. Use this screen to view and configure the
application rules.
Figure 74 Expert Mode > Applications > Bandwidth Management > Advanced: Application List: Edit
The following table describes the labels in this screen.
Table 47 Expert Mode > Applications > Bandwidth Management > Advanced: Application List: Edit
LABEL
#
Enable
Direction
Bandwidth
Destination Port
Source Port
Protocol
Chapter 13 Applications
DESCRIPTION
This column displays the categories to which the connected device applies.
This displays the name of the service.
Click the Edit icon to open the edit screen where you can modify an existing rule.
This is the index number of the user-defined service.
Select the check box to enable the service. Clear the check box to disable the service.
Use the drop-down list box to select a direction of travel of packets for which you want
to configure services.
Enter a descriptive name for the service.
Use the drop-down list box to select a category of the service.
Click the Edit icon to open the edit screen where you can modify an existing rule.
Click the Delete icon to remove a rule.
Click Apply to save your customized settings.
Click Cancel to begin configuring this screen afresh.
DESCRIPTION
This is the index number of the service rule.
Select the check box to enable the rule. Clear the check box to disable the rule.
This displays traffic direction of the service.
Select Maximum Bandwidth or Minimum Bandwidth and enter the maximum
bandwidth or minimum bandwidth (in Kbps) next to the drop-down list box allowed for
the traffic.
This displays the port number of the destination that define the traffic type.
This displays the port number of the source that define the traffic type.
This is the transport layer protocol used for the service.
NBG6617 User's Guide
115