ZyXEL Communications NBG6617 User Manual page 116

Table 47 Expert Mode > Applications > Bandwidth Management > Advanced: Application List: Edit
LABEL
Apply
Cancel
13.3.2.2 User-defined Service Edit
Click the Edit icon in the Modify field to open the edit screen. Use this screen to configure user-
defined service rules.
Figure 75 Expert Mode > Applications > Bandwidth Management > Advanced: User-defined
Service: Edit
The following table describes the labels in this screen.
Table 48 Expert Mode > Applications > Bandwidth Management > Advanced: User-defined Service:
Edit
LABEL
Bandwidth Budget
Destination
Address Start
Destination
Address End
Destination Port
Source Address
Start
Source Address End Enter the ending IP address in a range here.
Source Port
Protocol
Apply
Cancel
Chapter 13 Applications
DESCRIPTION
Click Apply to save your customized settings.
Click Cancel to begin configuring this screen afresh.
DESCRIPTION
Select Maximum Bandwidth or Minimum Bandwidth and enter the maximum
bandwidth or minimum bandwidth (in Kbps) next to the drop-down list box allowed for
the service.
Enter the single IP address or the starting IP address in a range here.
Enter the ending IP address in a range here.
This is a single port number that defines your user-defined service.
Enter the single IP address or the starting IP address in a range here.
This is a single port number that defines your user-defined service.
Select the transport layer protocol (TCP, UDP or BOTH) that defines your user-defined
service.
Click Apply to save your customized settings.
Click Cancel to begin configuring this screen afresh.
NBG6617 User's Guide
116