Table of Contents
Advertisement
Table 38 Expert Mode > LAN > Static DHCP (continued)
LABEL
Apply
Cancel
12.6 IPv6 LAN Screen
Use this screen to configure the IP address for your NBG6617 on the LAN. Click Expert Mode >
LAN > IPv6 LAN.
Figure 65 Expert Mode > LAN > IPv6 LAN
The following table describes the labels in this screen.
Table 39 Expert Mode > LAN > IPv6 LAN
LABEL
LAN IPv6 Address Assignment
Enable_DHCPv6-PD
Select this option to use DHCPv6 prefix delegation. The NBG6617 will obtain an IPv6 prefix from the ISP or a
connected uplink router for the LAN.
Autoconfiguration
Type
IPv6 Address range
(Start)
IPv6 Address range
(End)
Chapter 12 LAN
DESCRIPTION
Click Apply to save your changes with the NBG6617.
Click Cancel to begin configuring this screen afresh.
DESCRIPTION
Select SLAAC + RDNSS to enable IPv6 stateless auto-configuration on this interface.
The interface will generate an IPv6 IP address itself from a prefix obtained from an IPv6
router in the network.
Select SLAAC + Stateless DHCPv6 to enable IPv6 stateless auto-configuration on this
interface. The interface will get an IPv6 address from an IPv6 router and the DHCP
server. The IP address information gets through DHCPv6.
Select Stateful DHCPv6 to allow a DHCP server to assign and pass IPv6 network
addresses, prefixes and other configuration information to DHCP clients.
Enter the beginning of the range of IP addresses that this address object represents.
Enter the end of the range of IP address that this address object represents.
NBG6617 User's Guide
102
Hide quick links:
Advertisement
Table of Contents
