Adjusting The Back Angle - Invacare Solara 3G User Manual

12.2 Adjusting the Back Angle

Adjusting the Back Angle on Wheelchairs Equipped with Fixed Back
1. Remove the mounting screw, spacer and locknut that secures the inner and outer backrest mounting brackets together.
2. Repeat STEP 1 for the remaining back cane.
3. Adjust the back to the desired angle by aligning the mounting hole of the inner bracket with the mounting hole of the outer bracket. The available
° °
back angles are 90 , 95 , 100
4. Secure the inner and outer backrest mounting brackets together at the desire back angle with a mounting screw, spacer and locknut. Securely tighten.
5. Repeat STEP 4 for the remaining back cane.
Mounting
Inner Backrest
Screw
Mounting Bracket
Part No 1154295
° ° ° ° °
, 105 , 110 , 115 , 120 (Detail "A").
Spacer
Outer Backrest Mounting Bracket
FIGURE 2 Adjusting the Back Angle on Wheelchairs Equipped with Fixed Back
Locknut
90°
100°
110°
120°
101
Invacare® Solara®3G/Spree 3G Wheelchair
12 BACK/SEAT
DETAIL "A" - AVAILABLE
BACK ANGLES
95°
105°
115°