Replacing
1.
Remove the hex screw, locknut and seat positioning strap from the back plate of the wheelchair frame.
2.
Discard existing seat positioning strap.
3.
Install the new seat positioning strap to the wheelchair. Refer to Installing/Replacing Seat Positioning Straps on page 104.
Part No 1154295
Back Plate
Seat Positioning Strap
Hex Screw
FIGURE 7 Installing/Replacing Seat Positioning Straps
Back Cane
Locknut
Coved
Spacers
105
Invacare® Solara®3G/Spree 3G Wheelchair
12 BACK/SEAT