13 TILT
WARNING
DO NOT over tighten the cable adjusting nut on the cable. Over tightening the cable adjusting nut on the cable WILL
unlock the tilt mechanism, possibly causing injury.
•
To Tighten - Turn the cable adjusting nut clockwise. DO NOT overtighten the cable adjusting nut.
•
To Loosen - Turn the cable adjusting nut counterclockwise.
C.
While holding the cable adjusting nut in place, tighten the cable locking nut against the cable adjusting nut.
D. Repeat STEP 1.
E.
Repeat STEP 2 until the left side of the wheelchair does not tilt and that the gear sector fully engages with the gear rack.
3.
If necessary, repeat STEPS 1 and 2 to adjust the left trigger release lever.
WARNING
When cables have been rerouted due to seat depth adjustment, chair width adjustment, or seating accommodation, cables
MUST be readjusted.
Invacare® Solara®3G/Spree 3G Wheelchair
108
Part No 1154295