Table of Contents
Advertisement
Quick Links
Download this manual
See also:
User Manual
Advertisement
Table of Contents
Related Manuals for Sonic SoundGate 2
Summary of Contents for Sonic SoundGate 2
- Page 1 Sonic · Bluetooth Connectivity Guide ® Effective February 1, 2014 Bluetooth Connectivity Guide ® SoundGate 2 TV Adapter 2 Phone Adapter 2 www.sonici.com...
- Page 2 Pair of Sonic hearing instruments A SoundGate 2 Make sure you also have the following parts that were delivered in the original SoundGate 2 packaging: 1 Neck strap antenna 2 Wall outlet charging unit or USB charger cable 3 Charger cradle...
- Page 3 Sonic · Bluetooth ® Connectivity Guide A TV Adapter 2 Make sure you also have the following parts that were delivered in the original TV Adapter 2 packaging: 4 Power adapter 5 SCART adapter 6 RCA cable 7 TOSLINK cable...
-
Page 4: Hearing Instruments
Pairing the hearing instruments to the SoundGate 2 1 Verify that you have new batteries for the hearing instruments. 2 Make sure that the SoundGate 2 is fully charged and powered ON. If not, recharge the day before your demonstration. You may use the wall outlet power... -
Page 5: Mobile Phone
Sonic · Bluetooth ® Connectivity Guide Mobile Phone Preparation of the mobile phone The first time the SoundGate 2 is used with a Preparation of the SoundGate 2 – Bluetooth -enabled mobile phone, a one-time ® Put the SoundGate 2 into... -
Page 6: Answering A Call
Connectivity Guide ® Demonstration of the mobile phone Ensure that the hearing instruments are on. The SoundGate 2 should be worn with the neck strap antenna around the neck. Answering a call Making a call 1 Call the mobile phone number previously paired... -
Page 7: Connecting Using Toslink
Connectivity Guide TV Adapter 2 Preparation of the TV Adapter 2 A secure connection between the SoundGate 2 and TV Adapter 2 must be established. Follow the instructions below to prepare the devices for use. 1 Connect the TV Adapter 2 to a power outlet. -
Page 8: Connecting Using Rca
Sonic · Bluetooth Connectivity Guide ® Connecting using RCA 1 Connect one end of the RCA cable to the RCA output on the TV/home theatre system, typically marked ‘L – R AUDIO OUT’ and found on the TV back or bottom panel... - Page 9 5 – 6 seconds until the status indicator starts flashing blue rapidly SN2_ILLU_TopLedFlashingBlue_HI 2 Place the SoundGate 2 on top of the TV Adapter 2 – the pairing can take up to 60 seconds. The pairing is completed when the TV Adapter 2 power indicator turns blue and then steady orange.
- Page 10 Connectivity Guide ® Phone Adapter 2 Preparation of the Phone Adapter 2 A secure connection between the SoundGate 2 and Phone Adapter 2 must be established. Follow the instructions below to prepare the devices for use. Connecting the Phone Adapter 2 to the landline phone 1 Connect the Phone Adapter 2 to a power outlet.
- Page 11 Pairing the SoundGate 2 with the Phone Adapter 2 2 Place the SoundGate 2 on top of the Phone Adapter 2 – Ensure the Phone Adapter 2 is connected to a the pairing can take up to 60 seconds. The pairing is...
- Page 12 © 2014 Sonic Innovations, Inc. All rights reserved. Bluetooth is a registered trademark owned by ® Bluetooth SIG, Inc, USA. www.sonici.com 12.13 | 139469 | US...