Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Sonic BS-H200
Summary of Contents for Sonic BS-H200
-
Page 1: Installation Guide
Phone Adapter 2 Installation Guide User Guide www.sonici.com... -
Page 3: Table Of Contents
Table of Contents General Warnings Introduction Phone Adapter 2 Overview Installation Activating the Phone Adapter 2 for the First Time Setting Up the Phone Adapter 2 Pairing SoundGate with the Phone Adapter 2 Instructions for Use Additional Information Visual Indicators Technical Information Information and Explanation of Symbols Service... - Page 5 Congratulations on the purchase of your new Phone Adapter 2 wireless accessory. Your Phone Adapter 2 is intended to be used together with Sonic SoundGate devices and Sonic hearing instruments. This enables you to communicate wirelessly with a phone conversation partner via a landline phone (analogue/PSTN).
-
Page 7: General Warnings
General Warnings Familiarize yourself with the following general warnings before using your Phone Adapter 2. Products to be connected to external equipment The safety of the use of the Phone Adapter 2 with the auxiliary input cable is determined by the external signal source. - Page 8 The Phone Adapter 2 is not a toy and therefore should be kept out of the reach of children or anyone else who might swallow parts or otherwise cause injury to themselves. Special attention should be paid to smaller components in order to prevent children from swallowing them and choking.
-
Page 9: Introduction
Introduction The following items are included within your Phone Adapter 2 package and will be covered within this instruction guide: Phone Adapter 2 Phone Adapter 2 Model: BS-H200 Installation Guide User Guide Power adapter www.sonici.com SN2_ILLU_Charger_HI Installation Guide and User Guide... -
Page 10: Phone Adapter 2 Overview
Phone Adapter 2 Overview SN2_ILLU_PhoneAdapter_backside_BW_HI 1 Power indicator 4 AUX input* 2 Status indicator 5 Phone “IN“ connector 3 Power input 6 Phone “OUT“ connector * For a wireless headset connection to digital office phones using the Phone Adapter 2 Office Phone Kit. For further information, please ask your hearing care provider. -
Page 11: Installation
INSTALLATION... -
Page 12: Activating The Phone Adapter 2
Activating the Phone Adapter 2 for the First Time Before using with your landline telephone, the Phone Adapter 2 must be connected to a power outlet and an active landline telephone. The following pages offer easy step-by-step instructions on how to install and operate your Phone Adapter 2 device. -
Page 13: Setting Up The Phone Adapter 2
Setting Up the Phone Adapter 2 Ensure the Phone Adapter 2 is connected to a power outlet using the power adapter included in the Phone Adapter 2 packaging. The power indicator on the Phone Adapter 2 will illuminate green when power is connected. - Page 14 Remove the telephone cable from an active landline telephone (or base station).* Insert the telephone cable removed from the landline phone into the Phone “IN” connector of the Phone Adapter 2. SN2_ILLU_RemovePhoneCableFromPhone_BW_HI SN2_ILLU_InsertPhoneCableToAdapterIn_BW_HI...
- Page 15 Insert one end of the standard analog phone cable included in the Phone Adapter 2 packaging into the Phone “OUT” connector of the Phone Adapter 2. Insert the opposite end of the same standard analog phone cable into the landline telephone (or base station).* Lift the handset from your landline phone.
-
Page 16: Pairing Soundgate With The Phone Adapter 2
Pairing SoundGate with the Phone Adapter 2 Phone Adapter 2 may be used with all versions of SoundGate. Please follow the instructions below, specific to the version of your SoundGate. SoundGate 2 SoundGate SN2_ILLU_SoundgateProfile_HI Note! Pairing is done only once and will normally not have to be repeated. - Page 17 Pairing with SoundGate 2 Ensure the Phone Adapter 2 is connected to a power outlet and the SoundGate 2 battery is charged and powered ON. The power indicator on the Phone Adapter 2 and the SoundGate 2 should be illuminated green.
- Page 18 Pairing with SoundGate Ensure the Phone Adapter 2 is connected to a power outlet and the SoundGate battery is charged and the key lock is in the unlocked (green) position. The power indicator on the Phone Adapter 2 should be illuminated green. 1.
-
Page 19: Instructions For Use
INSTRUCTION FOR USE... - Page 20 For optimal use with the Phone Adapter 2, ensure the SoundGate is worn with the neck strap antenna and that the hearing instruments are powered on. Make a phone call 1. Press the SoundGate phone key. You will hear a dial tone in the hearing instruments and the SoundGate phone key will illuminate green.
- Page 21 SN2_ILLU_MouthToMicrophone_HI 4. To end the phone call at any time, press the SoundGate phone key. The phone key on the SoundGate and the phone indicator on the Phone Adapter 2 will no longer illuminate and the previous listening program will resume in the hearing instruments.
- Page 22 Answer a phone call 1. You will hear a call tone in your hearing instruments when your landline telephone receives an incoming call. The phone indicator on the Phone Adapter 2 and the phone key on the SoundGate will blink green.
- Page 23 4. To end the phone call at any time, press the SoundGate phone key. The phone key on the SoundGate and the phone indicator on the Phone Adapter 2 will no longer illuminate and the previous listening program will resume in the hearing instruments.
-
Page 24: Additional Information
Additional Information Turn off the Phone Adapter 2 If you do not wish to receive calls to your SoundGate, turn off the Phone Adapter 2 by disconnecting the power adapter. For normal use, the Phone Adapter 2 uses very little power so it is not necessary to turn it off. -
Page 25: Visual Indicators
Visual Indicators Phone Adapter 2 SoundGate 2 front status SoundGate 2 top status SoundGate SN2_ILLU_SoundgatePhoneKeyGreen_HI front status SN2_ILLU_SoundgatePhoneKeyGreenFlash_HI SN2_ILLU_SoundgatePhoneKeyNoLight_HI... -
Page 26: Technical Information
Technical Information Due to the limited size available on the device, many of the relevant approval markings are found in this document. The emission power from the Phone Adapter 2 is max. 39 dBμV/m @ 3 meters and is well below international emission limits for Human Exposure. - Page 27 FCC Statement Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. To comply with FCC RF exposure requirements, the device and the antenna for this device must be installed to ensure a minimum separation distance of 20 cm or more from a person’s body.
- Page 28 If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ·...
- Page 29 This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
- Page 30 This Phone Adapter 2 (model BS-H200) is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Declaration of conformity is available at: Sonic Innovations, Inc. 2501 Cottontail Lane Somerset, NJ 08873 This product is intended for connection to the public switched analogue telephone network and may be operated in EU and EFTA countries.
-
Page 31: Information And Explanation Of Symbols
Information and Explanation of Symbols The CE conformity marking indicates conformance to all applicable European Directives This symbol indicates that it is important for the user to read and take into account the relevant information in these instructions for use This sign indicates important safety information that must be observed to minimize risks or to avoid... -
Page 32: Service
Service If the information listed on the previous pages did not solve a problem you are having with your Phone Adapter 2 device, please contact your hearing care professional. Do not attempt to repair your Phone Adapter 2 device yourself. Place stamp with dispenser name and address here:... - Page 33 Notes...
- Page 34 Notes 135453 | UK...
- Page 36 Somerset, NJ 08873 USA 3018 Bern, Switzerland + 1 888 423 7834 + 41 31 560 21 21 Australia Canada Sonic Innovations Pty Ltd Sonic Innovations Canada Ltd. Wholesale & Equipment Division 2885-B le Corbusier Blvd 629 Nudgee Road Laval, Québec H7L 4J5...