Ibm Oem; Serial Emulation Mode; Keyboard Emulation Mode - Honeywell MS2420 Installation And User Manual

Cable Installation (Interface Specific)
Full Speed USB
9. Turn on the host system.
10. Configure the scanner to match the host system's USB parameters.
For Single Cable Applications:
The IBM OEM Full Speed USB English and Metric bar codes are located in the MS2x20 Stratos
Series Scanner/Diva Scale Configuration Addendum (PN 00-02272x) under Scanner
Configuration Bar Codes: Single Cable Protocols for POS Compatibility, IBM OEM Full Speed
USB.
For Dual Cable Applications:
The IBM OEM Full Speed USB Communication Defaults bar code is located in the MS2x20
Stratos Series Scanner/Diva Scale Configuration Addendum (PN 00-02272x) under Scanner
Configuration Bar Codes: Dual Cable Scanner Configuration Bar Codes, IBM OEM Full Speed
USB Communication Defaults and IBM OEM Full Speed USB Protocols.
For USB Serial Emulation Mode or Keyboard Emulation Mode Only
These features can only be used for Dual Cable Applications.
11. Configure the scanner for USB Serial Emulation Mode or USB Keyboard Emulation Mode by scanning the
appropriate configuration bar codes in the USB section of the MetroSelect Configuration Guide
(PN 00-02407x) under Low Speed USB. Any low speed USB warnings may be disregarded when utilizing
these codes for a Full Speed USB scanner.
Note: These features can only be used for Dual Cable Applications. The IBM OEM Full Speed USB
Communication Defaults bar code listed in step 10 must be scanned before scanning one of these
bar codes or this feature will not work properly.
25