Beeper Options and Button Functions
Changing the Beeper Tone
Beeper tones may be configured incrementally using the following bar code. The new tone will be heard
followed by a short pause. Two more new tones will be heard signifying the new setting has been stored in
memory. The silent (no beep) tone is also selectable.
Next Beep Tone
9
9
9
7
5
Changing the Beeper Volume
Volume levels may be configured using the volume button or incrementally using the following bar code. The
new volume will be heard followed by a short pause. Two more tones will be heard signifying the new setting
has been saved in memory. The silent (no volume) tone is also selectable.
The Multi-Function Button
Figure 33. Changing the Beeper
Volume
Figure 34. Laser & Motor Off
Power Save Mode
Figure 35. Normal Operation
44
Tone
Next
Figure 32. The Multi-Function Button
Changing the Beeper Volume
A short (<3 second) depression and the beeper volume will change.
The new volume will be heard. The silent (no beep) volume is also
selectable.
Placing the Unit in Laser & Motor Off Power Save Mode
Long (>3 seconds) depression The Laser & Motor Off Power Save Mode is
the only power save mode that can be activated with the multi-function
button*.
* This feature is configuration dependent. Refer to the MetroSelect
Configuration Guide (PN 00-02407x) under Scanner Operation: Power
Save Modes to enable this feature.
Waking the Unit from All Power Save Modes
The next button depression will awaken the scanner for normal operation.
Next Volume
V o
9
³
9
9
9
7
4