Fire Prevention And Environmental Protection, Fluids And Lubricants, Indirect Materials - MTU 12V 4000 L32 F Operating Instructions Manual

1.8 Fire prevention and environmental protection, fluids and
lubricants, indirect materials
Fire prevention
Flames, naked light and smoking are prohibited.
Ensure the area is well ventilated when working with combustible indirect materials (e.g. cleaning agents).
The resultant steam/air mixture must be sufficiently diluted to prevent a potentially explosive atmosphere.
Rectify any fuel or oil leaks immediately. Oil or fuel on hot components can cause fires so keep the product
clean at all times. Do not leave rags saturated with fluids and lubricants on the product. Do not store com-
bustible materials near the product.
Clean welding points with a non-flammable fluid before welding. Do not carry out welding work on pipes and
components carrying oil or fuel.
When starting the engine with an external power source, connect the ground lead last and remove it first. To
avoid sparks in the vicinity of the battery, connect the ground lead from the external power source to the
ground lead of the engine or to the ground terminal of the starter.
Ensure that suitable extinguishing agents (fire extinguisher) are always available and that staff are familiar
with their correct handling.
Noise
Wear ear protectors in work areas with a sound pressure level in excess of 85 dB (A).
Noise can lead to an increased risk of accident if acoustic signals, warning shouts or noises indicating dan-
ger are drowned.
Environmental protection and disposal
Dispose of used fluids, lubricants and components in accordance with local regulations.
Within the EU, batteries can be returned free of charge to the manufacturer where they will be properly recy-
cled.
Indirect materials, fluids and lubricants
Indirect materials, fluids and lubricants may be hazardous or contain toxic substances. Observe the informa-
tion provided in the safety data sheet for the product when using indirect materials and other chemical sub-
stances. The safety data sheet may be obtained from the relevant manufacturer or from MTU.
Used oil
Used oil contains harmful combustion residue.
Wear protective gloves!
Wash relevant areas after contact with used oil.
Lead
• Adopt suitable measures to avoid the formation of lead dust.
• Switch on extraction system.
• Avoid direct contact with lead or pastes containing lead.
• Do not inhale lead vapors.
• Wash affected areas after contact with lead or substances containing lead.
MS150104/02E 2016-11 | Safety | 17