Smartmemory; Memory Subsystem Architecture - HP HPE ProLiant ML110 Gen9 User Manual

DIMM type
RDIMM
RDIMM
RDIMM
LRDIMM
RDIMM
Maximum memory capacity - Intel Xeon E5-2600 v4 processor installed
DIMM type
RDIMM
RDIMM
RDIMM
RDIMM

SmartMemory

SmartMemory authenticates and unlocks certain features available only on Qualified memory and verifies
whether installed memory has passed Hewlett Packard Enterprise qualification and test processes.
Qualified memory is performance-tuned for ProLiant and BladeSystem servers and provides future
enhanced support through Active Health and manageability software.

Memory subsystem architecture

The memory subsystem in this server is divided into channels. The processor supports four channels, and
each channel supports two DIMM slots, as shown in the following table:
Channel
1
2
3
4
For the location of the slot numbers, see "DIMM slot locations (on page 11)."
This multi-channel architecture provides enhanced performance in Advanced ECC mode. This
architecture also enables Online Spare Memory mode.
DIMM slots in this server are identified by number and by letter. Letters identify the population order. Slot
numbers indicate the DIMM slot ID for spare replacement.
DIMM rank
Single-rank
Dual-rank
Dual-rank
Dual-rank
Dual-rank
DIMM rank
Single-rank
Single-rank
Dual-rank
Dual-rank
Population order
A
E
B
F
C
G
D
H
Capacity (GB)
8
8
16
16
32
Capacity (GB)
8
16
16
32
Slot number
8
7
6
5
1
2
3
4
Maximum capacity
for one processor
(GB)
64
64
128
128
256
Maximum capacity
for one processor
(GB)
64
128
128
256
Hardware options installation 63