Fcc 15 Compliance Statement - Stihl MSA 120 C Instruction Manual

26 Specifications
Maximum guide bar length
Direction of saw chain rotation
Turn clockwise to tension the saw chain.
Certification mark of the CSA-Group. Products
bearing this mark have been certified based on
national standards by the CSA third party
Certification Body.
STIHL products must not be disposed of in the
household trash, but only in accordance with local,
state and federal laws and regulations and as
provided in this manual, @ 29.
Direct current
Number of cells and energy content according to cell
manufacturer's specification. The energy content
available in specific applications is lower.
The RBRC seal indicates that STIHL has prepaid for
battery recycling.
Read the manual.
Insulation: Class II (Double Insulation)
Use and store charger only indoors in dry rooms.
California Energy Commission. This battery system
complies with the California Energy Commission
efficiency requirements.
Manufacturer Code
0458-716-8621-C

26.9 FCC 15 Compliance Statement

This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
– this device may not cause harmful interference.
– this device must accept any interference received,
including interference that may cause undesired
operation.
Note: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:
– reorient or relocate the receiving antenna,
– increase the separation between the equipment and
receiver,
– connect the equipment into an outlet on a circuit different
from that to which the receiver is connected,
– consult an authorized STIHL servicing dealer or an
experienced radio/TV technician for help.
Do not change or modify this product in any way unless
specifically allowed in this manual, since this could void your
authority to operate it.
English
57