Dspnode - Cisco MGX 8850 Installation And Configuration Manual

dspnode

Displays a summary of the interface shelves.
The dspnode command can isolate the shelf where an alarm has originated. For example, when you
execute dspalms, the display indicates the number of shelves with alarms but does not identify the
shelves. Therefore, execute dspnode on the hub node to determine which interface shelf generated
the alarm.
The first example shows a screen display with dspnode executed on a BPX node. The second
example shows a screen with dspnode executed on an IGX/AF. When executed on an IGX/AF,
dspnode shows the name of the hub node and the trunk number. Note that to execute a command
from an IGX/AF itself, you must either telnet to the shelf or use a control terminal attached to the
shelf.
You can also display the VSI controllers on a BPX node using dspnode.
Full Name
Display node
Syntax
dspnode
Related Commands
addshelf, delshelf, dsptrk
Attributes
Privilege
Jobs
Log
Node
Lock
Example 1
dspnode
Description
Display information about the interface shelves (executed on the BPX 8600-series hub node).
1–6
No
No
BPX, IGX, IGX/AF
Yes
Switch Commands That Apply to the MGX 8850 Node D-21
dspnode