Cisco MGX 8850 Installation And Configuration Manual page 244

addshelf
Example for Adding an MGX 8850 PAR (Portable AutoRoute) Interface Shelf
Add an MGX 8850 at trunk 4.8. After you add the MGX 8850 shelf, the screen displays a
confirmation message and the name of the shelf. Add the MGX 8850 (may be referred to on screen
as PAR) as follows:
addshelf 4.8 x
The sample display shows that an MGX 8850 was added on trunk 4.8 as a Portable AutoRoute (PAR)
type of interface shelf. (Adding an MGX 8850 shelf is similar to adding a LSC interface shelf.)
System Response
pswbpx3
Trunk
This Command: addshelf 4.8 x
Enter Interface Shelf Type: A (MGX 8220), P (EPS), V (VSI), X (PAR), I (IGX/AF)
Next Command:
D-18 Cisco MGX 8850 Installation and Configuration, Release 1.1.10, Part Number 78-6186-03
TN SuperUser
Name Type
4.8 SIMFDR0 PAR
BPX 8600
BPX Interface Shelf Information
Part Id Ctrl Id
- -
9.1 June 6 1998 13:28 PST
Alarm
OK