Attributes Privilege; Jobs Yes; Log Yes; Lock Yes - Cisco MGX 8850 Installation And Configuration Manual

Related Commands
delshelf, dspnode, dsptrks
Attributes
Privilege 1–4
Jobs Yes
Log Yes
Node BPX 8600-series switch with IGX and IPX interface
shelves;
IGX switch with IPX and IGX shelves
BPX 8600-series switch with the MGX 8220 shelf
BPX 8600-series switch with the MGX 8850 shelf
BPX 8600-series switch for label switching
controller (LSC)
BPX 8600-series switch for Extended Services
Processor
Lock Yes

Example 1

Interface shelf: addshelf 11.1 a 21 200
LSC: addshelf 4.1 vsi 1 1

Description

Interface shelf:
Add trunk 11.1 as an MGX 8220 interface shelf. After you add the shelf, the screen displays a
confirmation message and the name of the shelf.
LSC:
Add trunk 4.1 as a VSI-LSC interface shelf. After you add the LSC, the screen displays a
confirmation message and the name of the shelf.
Description for Label Switching
For label switching, before it can carry traffic, you need to "up" the link to a label switch controller
(using either uptrk or upport) at the BPX 8600-series node. You can then "add" the link to the
network (using addshelf). Also, the link must be free of major alarms before you can add it with the
addshelf command.
Once you "up" a port on the BXM in either trunk or port mode by using either the uptrk or
Note
upport commands, respectively, you can only "up" the ports in the same mode.
Switch Commands That Apply to the MGX 8850 Node D-15
addshelf