Restore To Factory Default - Cisco NSS32 Administration Manual

Managing the System
Administration
STEP 1
STEP 2
!
CAUTION
STEP 3
!
CAUTION When you restore to the factory default settings, all of the drive data, user
Cisco Small Business NSS300 Series Smart Storage Administration Guide
To upgrade the firmware:
Choose Administration > Firmware Upgrade from the Navigation menu. The
Firmware Upgrade window opens. The current firmware version is displayed.
Click Browse to locate the correct firmware file for the system update. Before
updating the system, verify that the product model and firmware version you are
going to update is correct.
As a precautionary measure, backup the NAS system configuration before
upgrading the firmware.
Click Update The System.
Within 15 seconds, a MD5 checksum result window will display to confirm the
integrity of the system. After the successful integrity check of the NAS, click OK
for the new firmware file to upload to the NAS. After this has completed, a
message displays and asks you to reboot the system. Please wait patiently. A
system log in window will automatically display after the successful update to the
new firmware.

Restore to Factory Default

From the Administration > Restore to Factory Default window, you can restore all
NAS settings to the factory default settings.
accounts, network shares, and system settings are cleared and restored to
default. Please back up all important data and system settings before resetting
the NAS.
3
93