Managing the System
External Device
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
Cisco Small Business NSS300 Series Smart Storage Administration Guide
To enable UPS support:
Ensure that the UPS is connected to your NAS according to the instructions from
the UPS manufacturer.
Choose External Device > UPS Settings from the Navigation menu. The UPS
Settings window opens.
Click Enable UPS Support.
To turn off the NAS after a specified amount of time after power has failed, click
After the AC power fails for x minute(s), turn off the server, and specify a time in
minutes.
To put the server in standby mode after the power has failed, click After the AC
power fails for x minute(s), the server should enter standby mode, and specify
a time in minutes. When power resumes, the system resumes to operation status.
In Protocol, choose a connection method from the drop-down list:
•
USB UPS (auto detect)— Choose if your UPS is connected to the NAS via
USB.
•
APC UPS with SNMP Management—Choose if your UPS is connected to
the NAS via IP SNMP.
3
232