Getting Started
Inline Power Switch Module
Inline Power Switch Module
Cisco Small Business NSS300 Series Smart Storage Administration Guide
-
System management port - 8080
•
System tools: IP filter settings - Allow all connections
•
LCD panel password: (blank)
An inline switch module is provided for customers who wish to have a convenient
means of turning the device off during extended inactivity. The switch module is
provided in compliance with the requirements of the
Regulation No 1275/2008
module by plugging the power cord directly into the device. However, the switch
module must be used to comply with the European Union regulations.
To use the inline switch module to power off the NAS, you should first press the
front panel Power button to shut down the NAS. Wait for the device to fully shut
down before connecting and using the inline switch. Failure to do so may result in
data loss.
The following shows the AC inline switch module for the NSS324 and NSS326.
. The device is also fully functional without the switch
European Union Commission
2
40